Rapid method to obtain high quality nuclear and chromosome images directly from living cells in the Characeae

This study focused on a method based on the capacity of cationic dyes to stain only the nucleus and chromosomes in cells subjected to either acid or alkaline hydrolysis. The method and the squash were optimized for the Characeae and were described in detail. Nuclei from vegetative shoot apices and antheridial filament cells of unfixed, fixed and herbarium material of Nitella opaca were investigated using the Azure A or Toulidine Blue stains. Comparisons with some other staining methods, used in the previous studies, were also reported. The Azure A/Toulidine Blue method is useful to obtain clear images of chromosome morphology comparable or higher to that obtained with Feulgen or Aceto‐Orcein. It requires little time and a less complicated procedure in comparison with other staining methods.     

An interactive surgical simulation tool to assess the consequences of a partial glossectomy on a biomechanical model of the tongue

Oral cancer surgery has a negative influence on the quality of life (QOL). As a result of the complex physiology involved in oral functions, estimation of surgical effects on functionality remains difficult. We present a user-friendly biomechanical simulation of tongue surgery, including closure with suturing and scar formation, followed by an automated adaptation of a finite element (FE) model to the shape of the tongue. Different configurations of our FE model were evaluated and compared to a well-established FE model. We showed that the post-operative impairment as predicted by our model was qualitatively comparable to a patient case for five different tongue maneuvers.     

A screening method to analyse the sensitivity of a lower limb multibody kinematic model

The study presents a screening method used to identify the influential parameters of a lower limb model including ligaments, at low numerical cost. Concerning multibody kinematics optimisation, the ligament parameters (isometric length) were found the most influential ones in a previous study. The screening method tested if they remain influential with minimised length variations. The most important parameters for tibiofemoral kinematics were the skin markers, segment lengths and joint parameters, including two ligaments. This was confirmed by a quantitative sensitivity analysis. The screening method has the potential to be used as a stand-alone procedure for a sensitivity analysis.     

Stress distribution of three-unit fixed partial prostheses (conventional and pontic) supported by three or two implants: 3D finite element analysis of ductile materials

In implantology, when financial or biological feasibility limitations appear, it is necessary to use prostheses with geometries that deviate from the conventional, with a pontic in the absence of an intermediate implant. The aim of this study was analyze and understand the general differences in the stresses generated in implants, components and infrastructures according to the configuration of the prosthesis over three or two implants. Thus, this paper analyzes the von Mises equivalent stresses (VMES) of ductile materials on their external surfaces. The experimental groups: Regular Splinted Conventional Group (RCG), which had conventional infrastructures on 3 regular-length Morse taper implants (4x11?mm); Regular Splinted Pontic Group (RPG), which had infrastructures with intermediate pontics on 2 regular-length Morse taper implants (4x11?mm). The simulations of the groups were created with Ansys Workbench 10.0 software. The results revealed that the RPG presented greater areas of possible fragility due to higher stress concentrations, for example, in the cervical area of the union between the implant and component the top platform of the abutment, as well as greater coverage of the stress by the cervical implant threads. The RPG infrastructure was also more affected by stresses in the connection areas between the prostheses and on the occlusal surface. There is an advantage to using prostheses supported by a greater number of implants (RCG) because this decreases the stress in the analyzed structures and consequently improves stress dissipation to the supporting bone, which would preserve the system.     

Methods for studying cultural attraction

Cultural attraction theory (CAT) describes a general evolutionary process, cultural attraction, by which the spread and stability of cultural items (beliefs, practices, artifacts, etc.) result not just from differential reproduction, but also from transformations that systematically favor the reconstruction of cultural items of specific types. In this way, CAT aims to provide a general framework for the study of cultural evolution. In a thoughtful critical analysis, Buskell questions the ability of CAT to provide methodological guidance for research in cultural evolution. Can CAT be used to develop the sort of mid‐range theories and models that often drive empirical work? Here we argue that CAT can indeed be used in this way, and we outline the methodological practices that students of cultural attraction have used and are currently developing.     

Proposing a Radial Basis Function and CSDM Indices to Predict the Traumatic Brain Injury Risk

BackgroundMany head injury indices and finite element (FE) head models have been proposed to predict traumatic brain injury (TBI). Although FE head models are suitable methods with high accuracy, they are computationally intensive. Head motion-based brain injury criteria are usually fast tools with lower accuracy. So, the objective of this study is to propose new criteria along with an artificial neural network model to predict TBI risks, which can be fast and accurate.MethodsFor this purpose, 250 FE head simulations have been carried out at 5 magnitudes and 50 rotational impact directions using the SIMon model. The effects of directions and magnitudes of rotational impacts were assessed for cumulative strain damage measure (CSDM) values. Next, statistical analysis and neural network were applied to predict CSDM values.ResultsThe results of the present research showed that the direction of rotation in the sagittal and frontal planes had a considerable effect on the CSDM values. Furthermore, new brain injury indices and a radial basis function neural network have been proposed to predict CSDM values which having high correlation coefficients with SIMon responses.ConclusionsThe results of this research demonstrated that rotational impact directions should be used to develop new head injury criteria being able to predict CSDM values. However, findings of present research proved that head motion-based brain injury criteria and RBF network can be used to predict FE head model responses with high speed and accuracy.     

Comparative analysis of the methods used for finding surface energy to investigate protein interaction behavior on chromatographic supports

Hydrophobic interaction chromatography, an important and effective purification strategy, is generally used for the purification of variety of biomolecules. A basic understanding of the protein interaction behavior is required to effectively separate these biomolecules. A colloidal type extended Derjaguin, Landau, Verwey, and Overbeek calculations were utilized to study the interactions behavior of model proteins to commercially available hydrophobic chromatographic materials that is, Toyopearl Phenyl 650C and Toyopearl Butyl 650C. Physicochemical properties of selected model proteins were achieved by contact angle and zeta potential measurements. The contact angle of chromatographic materials used was achieved through sessile drop method on disrupted beads and capillary penetration method (CPM) on intact beads. The surface properties were further used to calculate the interactions of the proteins to chromatographic supports. The calculated secondary energy minimum of the proteins with the chromatographic materials (from the contact angle values determined through both methods can be correlated with the retention volumes from the real chromatography. The secondary energy minimum values are higher for each protein to the chromatographic materials calculated from the inputs derived through sessile drop method compared to CPM. For instance, immunoglobulin G has secondary energy minimum value of 0.17 kT compared to 0.11 kT, obtained through sessile drop method and CPM, respectively. Average relative values of the energy minimum calculated for all proteins are as 1.51 kT and 1.29 kT for Toyopearl Butyl 650C and Toyopearl Phenyl 650C, respectively, as a conversion factor for estimation of secondary energy minimum for both methods.     

肠出血性大肠埃希菌O157:H7噬菌体FEC14和FEC19特性及污染牛肉杀菌潜在应用探究

【背景】肠出血性大肠埃希菌O157:H7是重要的食源性致病菌之一,并且其耐药性越来越严重,寻找裂解性强噬菌体用于防治大肠埃希菌感染具有广阔的应用前景。【目的】从环境中分离鉴定能特异裂解大肠埃希菌O157:H7的噬菌体,通过对生物学特性及裂解细菌功效的探究,为其在食品安全防控中提供理论依据和研究基础。【方法】通过双层平板法分离并纯化噬菌体,透射电镜观察噬菌体形态,测定最佳感染复数、一步生长曲线、pH稳定性、温度稳定性,对噬菌体进行全基因组测序及噬菌体裂解细菌功效。【结果】2株大肠埃希菌O157:H7噬菌体FEC14和FEC19的头部皆呈二十面体立体对称,FEC14头部直径约80nm,尾丝呈星形,FEC19头部直径约58 nm,尾丝呈针形;噬菌体FEC14的最佳感染复数为0.001,潜伏期为15 min,裂解期为65 min,平均暴发量为156 PFU/cell,FEC19的最佳感染复数为0.1,潜伏期为10 min,裂解期为80 min,平均暴发量为800 PFU/cell;噬菌体FEC14能在60℃、pH 4.0-11.0条件下存活,噬菌体FEC19在70℃、pH5.0-9.0条件下存...     

Fragment molecular orbital calculations for biomolecules

Exploring biomolecule behavior, such as proteins and nucleic acids, using quantum mechanical theory can identify many life science phenomena from first principles. Fragment molecular orbital (FMO) calculations of whole single particles of biomolecules can determine the electronic state of the interior and surface of molecules and explore molecular recognition mechanisms based on intermolecular and intramolecular interactions. In this review, we summarized the current state of FMO calculations in drug discovery, virology, and structural biology, as well as recent developments from data science.     

Sensor heavy metal from natural resources for a green environment: A review relation between synthesis method and luminescence properties of carbon dots

Carbon dots (CDs) are 10-nm nanomaterial classes as excellent candidates in various applications: physics, biology, chemistry, and food science due to high stable biocompatibility and high surface expansive. CDs produced from natural materials have received wide attention due to their unique benefits, easy availabilities, sufficient costs, and harmless to the ecosystem. The various properties of CDs can be obtained from various synthesis methods: hydrothermal, microwave-assisted, and pyrolysis. The CDs have shown enormous potential in metal particle detection, colorimetric sensors, electrochemical sensors, and pesticide sensors. This review provides systematic information on a synthesis method based on natural resources and the application to the environmental sensors for supporting the clean environment. We hope this review will be useful as a reference source in providing the guidance or roadmap for new researchers to develop new strategies in increasing luminescence properties CDs for multi detection of heavy metals in the environment.